Konica Minolta

Europe

Accessories

Chroma Meters CR-400 / CR-410

The CR-400 and CR-410 are cost effective QC color measurement instruments with 8mm and 50mm measuring apertures for either reglar or irregularly coloured or textured samples. Widely adopted in industries such as foods and building products the color data is measured as the eye sees and is reported in simple Lab format.

Optional accessories for CR-400 / CR-410

Granular Attachment CR-A50

For measurements of powders, pastes, grains or other small sized granular material. The low reflectance glass plate protects the sample surface against disorientation and prevents specimen material to enter the instrument. The set includes one retaining ring each to adjust the measuring area accordingly to either CR-400 or CR-410.

Item Order Code: 1829-751

Glass Plate for CR-A51 (for CR-A50)

Replacement low reflectance glass plate for CR-A50 Granular Attachment.

Item Order Code: 1829-752

Retaining Ring Set CR-A52

Replacement ring set for CR-A50 Granular Attachment. The set consist of one ring each for CR-400 and CR-410.

Item Order Code: 1829-753

Light Protection Tube with glass protection plate CR-A33a (only for CR-400)

Light projection tube for measurement of pasty, wet or moist samples. The convex protection glass plate prevents specimen from entering the instrument. The CR-A33a is recommended for soft specimen. The diameter of the plate is 22 mm.

Item Order Code: 1849-731

Light Protection Tube with plate 40 mm CR-A33b (only for CR-400)

Standard light projection tube with 40 mm plastic disc. Provides high stability on the sample. Recommended for all standard applications.

Order Item Code: 1849-732

Light Protection Tube without plate CR-A33c (only for CR-400)

Light projection tube without plate for measurements on small samples where the 40 mm or 22 mm plate is too large.

Item Order Code: 1849-733

Light Protection Tube with plate 22 mm CR-A33d (only for CR-400)

Light projection tube with a plate of 22 mm diameter. Allows measurements on small specimen with high stability against tilting of the measuring head.

Item Order Code: 1849-734

Light Protection Tube with Glass Protection CR-A33e (only for CR-410)

Light projection tube for measurement of pasty, wet or moist samples. The protection glass plate prevents specimen from entering the instrument.

Item Order Code: 1849-735

Light Protection Tube with Glass Protection CR-A33f (only for CR-400)

Light projection tube for measurement of soft samples. The concave protection glass plate prevents specimen from entering the instrument. The CR-A33a is recommended for flattening soft or soft and wet specimen. The diameter of the plate is 22 mm diameter.

Item Order Code: 1849-736

Pivoting Base CR-A12 (only for CR-400)

Recommended for the measurement of flat samples. The large base plate increases the stability and the clear marked target area provides a precise positioning. The CR-A12 Pivoting Base set includes the Light Protection Tube CR-A33c (without plate).

Item Order Code: 1849-741

Specimen Holder CM-A96 (only for CR-400)

Required to fix opaque samples or the Glass or Disposal cells for measurement of opaque liquids in combination with the Sample Holder CR-A505. The clamp provides a constant pressure to the sample and the moveable side holders keep the cells in correct position.

Item Order Code: 1864-708

Glass Cell 10 mm CM-A98 (only for CR-400)

Cell made of optical glass with an optical path of 10 mm. Recommended for precise reflectance measurements of opaque liquids in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.

Item Order Code: 1864-710

Glass Cell 20 mm CM-A99 (only for CR-400)

Cell with made of optical glass with an optical path of 20 mm. Suitable for precise reflectance measurements of opaque liquids with lower density in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.

Item Order Code: 1864-711

Plastic Cell 10 mm CM-A131 (only for CR-400)

Disposal plastic cell with an optical path of 10 mm. Suitable for reflectance measurements of water based opaque liquids  in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.

Item Order Code: 1870-716

Plastic Cell 20 mm CM-A132 (only for CR-400)

Disposal plastic cell with an optical path of 20 mm. Suitable for reflectance measurements of water based opaque liquids with lower density or opaque paste in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.

Item Order Code: 1870-717

Cell Holder CR-A501 (only for CR-410)

For measurements of powders, grains and granular materials in combination with the Glass Cell CR-A504. The measuring head is set to up-side down position and the Cell Holder CR-A501 precisely fixes the position of the Glass Cell CR-502.

Item Order Code: 9970-219

Glass Cell CR-A502 (only for CR-410)

Glass Cell made of optical glass for measurements of powders, pastes, grains and small granular materials. Diameter of the cell 60 mm. For precise positioning the Cell Holder CR-A501 is recommended.

Item Order Code: 9970-220

Glass Cell CR-A504 (only for CR-400)

Cell made of optical glass for measurements of powders, pastes, grains and small granular materials. Diameter of the cell 34 mm. For precise positioning the Cell Holder CR-A503 is recommended.

Item Order Code: 9970-2504

Sample Holder CR-A505 (only for CR-400)

Base holder to set the measuring head in horizontal position. Allows in combination with the Specimen Holder CM-A96 measurements of small samples up to a thickness of 22.5 mm or with the Glass- or Disposal Cells with 10 or 20 mm optical path the measurement of opaque liquids.

Item Order Code: 9970-441

Flow Cell CM-A508 (only for CR-400)

For continuous measurements of opaque liquids in reflectance mode. The optical path of the cell is 10 mm and the max. pressure is up to 2 Bar. For the positioning of the Flow Cell CM-A508 the horizontal aligned Sample Holder CR-A505 and the Sample Holder CM-A96 are required.

Item Order Code: 9970-237

Vertical Stand USD CM-A516

The CM-A516 Vertical allows aligning the instrument in Up-Side-Down position and secures that the instrument cannot get out of balance by using the Cell-Holder CR-A503 for CR-400 and CR-A501 for CR-410.

Item Order Code: B027154

Hard Case CR-A103

For comfortable hand carrying and storage of measuring head, data processor and accessories.

Item Order Code: 1878-600

Data Cable CR-A102 RS232c

Connection cable between measuring head or data processor and PC. For PC terminals with 9 pin SUB-D connecter. Length of the cable 2 m.

Item Order Code: 1878-704